YH810 Thermal Signal Calibrator

◆Dual channel isolation, simulation output and measurement are independent of each other, and can work simultaneously without interfering with each other;

◆High accuracy measurement and output of mV, V, mA, Ω, frequency, and temperature signals;

◆Can simulate the output and measurement of 8 types of thermocouples (K, E, J, T, N, R, S, B) and 4 types of thermal resistors (Pt100, Pt10, Cu50, Cu100);

◆The temperature value, corresponding millivolt value, and resistance value are displayed simultaneously during thermocouple and thermal resistance measurement and output;

◆Thermocouples have automatic or manual cold junction temperature compensation functions, which facilitate the calibration of thermocouple instruments or equipment;

◆Ω and thermal resistance measurements can be completed: two wire measurement, three wire measurement, four wire measurement;

◆Simple measurement input and simulation output connection, convenient operation mode;

◆During temperature measurement, the error is displayed in ℃, while other functions display relative errors;

◆During measurement, zero drift can be cleared, self calibration function is available, and there is no need to return to the factory for calibration;

◆All simulation outputs can be self measured by this instrument, thereby improving the reliability of the instrument;

◆AC/DC dual-use, built-in rechargeable battery and safe automatic charging circuit, with real-time battery voltage display function;

◆Equipped with simulated two-wire transmitter current loop output function;

◆Provide independent 24V power supply;

◆Equipped with RS232 interface, can be equipped with dedicated software for automatic measurement in experiments;

◆Specialized thermal signal verification software can achieve fully automatic calibration of secondary instruments such as temperature transmitters, thermocouple/resistor dynamic coil temperature regulators, industrial process measurement recorders, temperature indicator regulators, etc. (optional)